Stages and Costs

Price on application, please contact us for further information or phone 04 5263339.

Start with a chassis and build your Replica from scratch and accumulate parts as you go or try the Rolling chassis, a good place to kick start your build and save a bit of cash, can be delivered to you to assembled or in parts.

Sandblasted and power coated Ladder type chassis frame, specially manufactured by Graham Berry Race Cars, frame fully bracketed to accept front and rear suspensions, steering, radiator, seat belts and chosen engine and gearbox. Sand blasted and powder coated

Fibreglass body
This is constructed of quality fibreglass, molded in one piece with floor, bulkhead, inner guards and boot floor bonded in whilst the shell is still in the mold. There are steel beams moulded in to the body to support the doors, and the doors are completed with side intrusion beams. Both the bonnet, with scoop attached and boot lid have inner skins molded in and are hinged and the latches fitted.

Rolling Chassis
Top & bottom A Arms
QA1 Shocks & Springs – front and rear
Sway Bar – bush mount kit – front and rear
25mm 4140 Sway Bar
16 mm 4140 Sway Bar
Sway Bar – link kit – front and rear
Wilwood Brake pads – front and rear
Wilwood 4 pot calipers – front and rear with integrated handbrake
Brake lines D.O.T. braided
Stub axles. Rotors. Bearings. Seals. Steering arms.
Fully rebuilt rack & pinion
All hard brakes & fuel line
Independent 9″ Diff – (supply own head) Alloy T6 centre housing. Alloy T6 outer bearing carriers. CV joints. CNC drive flanges & axles. Top & bottom Chrome Moly A Arms. Out board disc.

Complete your build
Accelerator linkage and pedal – complete
Body Mounting Kit
Bumper Chrome – front and rear
Bumper over riders – front and rear
Bumper pin grommets – front and rear
Bumper pins stainless steel – front and rear
Collectors –¬† Chrome plated.
Filler cap 3 1/2″ diameter
Filler neck, hoses and clamps
Handbrake set – cables and handle
Headers 351 – 429 engine H.P.C. Coated.
Lights – headlights and marker lights
Louvers – rough casting
Pedal box (manual) – complete with Booster, Pedal & Pads Brake Master Cylinder & Clutch Master Cylinder
Petrol tank
Radiator fan 16″
Rear view mirror and drivers side mirror
Roll bar – twin
Roll bar grommet set
Seat belts and stalks- retractable (pair)
Seat runners and fittings
Side pipes Chrome or HPC
Steering column complete with Boss
Steering wheel
Windscreen and frame
Wind wings & sun visors
Wiper motor assembly – complete
Wiring Loom

You decide ……….
Gear Box
Diff Head

Optional Items 
Tonneau cover
Stone Guards
Racetech Upholstered seats
Brake Kit Upgrade
Racing harness’s, hermologated roll bar and brace for MANZ racing.

We Stock
A full range of Cobra badges and accessories and can also quote on the above additional and optional items if you prefer us to organize this for you

Back to Top